O2 Simm> (651)484-0586 Installations Instructions Attention: Bracket Racers, Off Roaders, Hi-Performance [outlaw] Street Machines ! (click image to order) Single cat O2 SIMM. Price is $75 or two for $125 for those 2001 and newer vehicles with a Multi-Cat system. This device will allow you to remove the CAT on any 1997 and newer Dodge trucks. This unit has been tested on Dakotas, Durangos, Rams, and JGC. It will work with 3.9 V6, all of the V8s and V10 engines including Vipers. If you just remove the cat, and possibly the post cat O2 sensor you will get irratic idle, loss of performance, and a never ending MIL light ... We have the answer! The EAS Enterprises Post Cat O2 SIMM ! This device completely fools the PCM, it thinks you have a very efficient CAT installed. Simply replace the post cat O2 sensor with this device. The circuit board is computer grade fiberglass / epoxy, all of the components are MIL Spec, close tolerance. The board is dipped in epoxy paint, installed in the high impact ABS case then potted with high grade epoxy. This makes it totally vibration proof, and extremely moisture resistant. This yields a device that will work from -50' F to 250' F ... This part also will correct the problem of the Check Engine Light when the stock Cat is replaced with a Highflow Performance Cat.	Throttle bodies   V6 3.7 Liter   V6 3.9 Liter   I6 4.0 Liter   V8 4.7 Liter   V8 5.2-5.9 Liter   V10 8.0 Liter Transmission 02 Simms Fastman 408 powered 12 second Dakota (4.9 meg WMV format) "Only the 5th run on this setup 12.03 at 122 was my best to date Drove it to the track and got 14.7 mpg"   --Scott Check out our ThrottleBodies.
All material included in this site is copyrighted 2008 by - TheFastman.com - . All rights reserved. Please contact concerning any comments, questions or complaints of this website. This file was modified: Sunday, April 03, 2005; at 8:51:00 PM